Microphones
RODE NTG2 Shotgun Microphone Rental in Surrey, BC
A shotgun mic for dialogue and interviews, on a boom pole or on top of the camera. It runs on 48V phantom power or an AA battery, so it still works on a camera or recorder that can't supply phantom. An 80Hz high-pass filter trims low rumble from traffic and handling. Run it into our Zoom F6 or the Sony XLR handle, and put it in our RODE Blimp when you're working outside in wind.
$20 / day
$36 for 3 days$50 for a week
Weekend rate: out Friday from 12 pm and back Monday by 12 pm is 1 day. An earlier pickup or later return is 3 days.
Monday to Friday, 9 a.m. to 5 p.m. Need earlier or later? Call and we’ll arrange it.
| Total for |
|---|
Plus GST and PST.
Questions first? Call 778-244-4333
Before it leaves, we check every item against your booking, power it on and photograph its condition.
Questions about deposits or insurance? Call us and we'll walk you through it.
Good to know
- It has an XLR output, so it needs an XLR input: a recorder like the Zoom F6, a mixer, or a camera's XLR handle.
- With no phantom power, it runs on one AA battery. Take the battery out at the end of the day, since the mic draws power whenever one is in.
- The low-cut switch is recessed, so you need a pen tip to flip it.
- For booming, add our K-Tek boom pole and a shock mount. Outdoors, add the RODE Blimp or a furry windshield.
RODE NTG2 or NTG4+?
Both are RODE shotgun mics for a boom or a camera. Here's what changes as you go up.
Compare side by sideHide the comparison
| RODE NTG2 Shotgun MicrophoneThis one |  RODE NTG4+ Shotgun Microphone | |
|---|---|---|
| Day rate (differs) | $20 | $30 |
| Type | Condenser shotgun (line gradient) | Condenser shotgun (line gradient) |
| Pickup pattern | Supercardioid | Supercardioid |
| Frequency range | 20 Hz to 20 kHz | 20 Hz to 20 kHz |
| Connector | XLR | XLR |
| Power (differs) | 48V phantom, or one AA battery | 48V phantom, or the built-in rechargeable battery (over 150 hours a charge) |
| Switches (differs) | High-pass filter (80 Hz) | High-pass filter (75 Hz), -10 dB pad, high-frequency lift |
| Length (differs) | 280 mm | 278 mm |
| Weight (differs) | 161 g | 176 g |
Shaded rows are where they differ. From each listing's specs; call 778-244-4333 if something you need isn't here.
- This oneRODE NTG2$20 / day
Phantom power or one AA battery, with an 80 Hz low cut.
- Step upRODE NTG4+ Shotgun Microphone$30 / day
About the same length, with the same supercardioid pattern. It runs on its own rechargeable battery instead of an AA, and adds a -10 dB pad and a high-frequency lift.
Works with the RODE NTG2
Everything here fits the RODE NTG2. Tap Add and it joins this booking on the same dates; the total in the booking box updates as you go.
Connect your audio
It has an XLR output. Add an XLR cable from the list below.
6Ft XLR Cable$2 / day
10ft XLR Cable$2 / day
25ft XLR Cable$2 / day
1/4 in. TRS to XLR Female Cable, 6 ft$2 / day
20ft XLR Cable$2 / day
1/8in / 3.5mm to XLR Cable$1 / day
2ft XLR Cable$1 / day
XLR3F to 1/4 in TRS Adapter$1 / day
XLR3M to 1/4 in TRS Adapter$1 / day
Plug it into a recorder
Zoom F6 Field Recorder$40 / day
Zoom H4N Pro$20 / day
Sony XLR Handle$15 / day
Presonus Studio 26c Audio Interface$15 / day
RODE NTG2 specs
| Type | Condenser shotgun (line gradient) |
|---|---|
| Pickup pattern | Supercardioid |
| Frequency range | 20 Hz to 20 kHz |
| Connector | XLR |
| Power | 48V phantom, or one AA battery |
| Switches | High-pass filter (80 Hz) |
| Length | 280 mm |
| Weight | 161 g |
From RODE's published specifications.
Manuals and guides
- RODE NTG-2 Instruction Manual, RODE's manual for the mic (PDF)
Other audio to rent
See all audio
From$20/day
Call