Sliders
iFootage Carbon Fiber Shark Slider S1 with Dual Extension Tubes Bundle Rental in Surrey, BC
A carbon fibre slider for smooth push-ins and side moves on b-roll, product shots and interviews. Short, it gives about 64 cm of travel and carries up to 7 kg. With the extension tubes fitted, travel grows to about 1.2 m and the limit drops to 5 kg, so keep heavier rigs on the short setup. For a heavy cinema rig, our SL04 slider is built for the weight; for programmed moves and timelapses, try the motorized iFootage Nano II.
$25 / day
$45 for 3 days$63 for a week
Weekend rate: out Friday from 12 pm and back Monday by 12 pm is 1 day. An earlier pickup or later return is 3 days.
Monday to Friday, 9 a.m. to 5 p.m. Need earlier or later? Call and we’ll arrange it.
| Total for |
|---|
Plus GST and PST.
Questions first? Call 778-244-4333
Before it leaves, we check every item against your booking, power it on and photograph its condition.
Questions about deposits or insurance? Call us and we'll walk you through it.
Good to know
- It's a manual slider: you move the carriage by hand.
- Plan how you will mount the camera on the carriage and what the slider will sit on.
- Fit the extension tubes and run the carriage end to end before you are on set.
iFootage Shark Slider S1 or Shark Slider Nano II?
Here's what changes as you go up, from a manual slide to a motorized one.
Compare side by sideHide the comparison
iFootage Carbon Fiber Shark Slider S1 with Dual Extension Tubes BundleThis one | IFOOTAGE Shark Slider Nano II 660 Motorized Camera Slider | |
|---|---|---|
| Day rate (differs) | $25 | $70 |
| Travel (differs) | 640 mm short, 1200 mm with the extension tubes | 433 mm |
| Weight (differs) | 3.8 kg with the extension tubes | About 3 kg |
Shaded rows are where they differ. From each listing's specs; call 778-244-4333 if something you need isn't here.
This oneiFootage Shark Slider S1$25 / dayUp to 1.2 m of manual travel in carbon fibre, at 3.8 kg.
Step upIFOOTAGE Shark Slider Nano II 660 Motorized Camera Slider$70 / dayA motor slides and pans the camera at once, so you set a move on its touchscreen or app and repeat it take after take, or run a timelapse. Travel is shorter at 433 mm, and it needs a Sony NP-F battery or 60 W USB-C PD power.
Goes well with the iFootage Shark Slider S1
iFootage Shark Slider S1 specs
| Travel | 640 mm short, 1200 mm with the extension tubes |
|---|---|
| Max load | 7 kg short, 5 kg with the extension tubes |
| Overall length | 790 mm short, 1350 mm with the extension tubes |
| Tube diameter | 22 mm |
| Materials | Carbon fibre tubes, anodized aluminum |
| Weight | 3.8 kg with the extension tubes |
From iFootage's published specifications.
Manuals and guides
- iFootage Shark Slider S1 User Manual, iFootage's manual for the slider (PDF)
Other camera stabilization to rent
See all camera stabilization
Kamerar SD-1 Camera Slider Dolly 23"$25 / day
SL04 Adjustable Length Slider$100 / day
DJI Osmo Mobile 7 Gimbal Phone Stabilizer$15 / day
DJI Ronin RS4 Pro Combo Stabilizer$70 / day
From$25/day
Call

